by Laurie Barcaskey Labeling allows identification to be applied and maintains component integrity with no deformation to the surface. Optional adhesives allow the labels to be used in various environments and offer tamper-evident options for security. While there are cost savings in some instances to have labels pre-printed and ready for on-demand application, at other times there is a distinct benefit to printing labels on-demand where label design is done in-house for quick edit corrections or job-specific requirements. Printing In-House In house printing provides flexibility for label details and printing/applying in individual work cells. Volume printing can be maximized through stocking materials for just-in-time printing. If you want to see some of these tools in action, check out the video below. Pre-Printed Labels Pre-printed labels allow you to brand the product with corporate logos and color schemes while heightening the specific product details or cautions associated with their use. About the Author Laurie Barcaskey of Leading Marks is an authorized manufacturer’s representative with 30 years of experience and shop floor knowledge of solutions for industrial identification, part traceability and pipe testing. Laurie is the third generation of one of the marking industry’s most innovative and enduring family legacies, tracing back to 1889.
0 Comments
Pittsburgh, Pa. -Leading Marks announces a new partnership with MAX USA for the distribution of the BePop line of safety labeling thermal printers. This new product segment compliments and strengthens the solutions for high-volume 4-color labels are required over pre-printed options. MAX has been recognized as a world leader of high-end industrial tools and office products since 1942. Now with USA offices in Mineola, New York, MAX is penetrating the market with a variety of printers for quality printing of safety signs and labels. With the ability to print 4” and 8” wide material, it also includes vinyl-cutting technology. Using the BePop PC-EX Software you can print and cut to size 4-color labels for health & safety, engineering, electrical, plant ID, asset & product ID, pipe markers, chemical ID, facilities management, control panels, and the list goes on. For more information about the other industrial identification solutions available from Leading Marks call 412-366-4733 or email sales@leadingmarks.com. Lets meet up at PittChem Day on Tuesday, October 2, 2018. This event, held at Heinz Field, is organized by the Chemical Association of Pittsburgh. The Chemical Association of Pittsburgh is a non-profit corporation formed to foster and promote interest and awareness in the local chemical industry and to encourage wider acquaintance among those engaged in the allied industries. The day long event will feature a number of speakers and some great networking opportunities As a sponsor, Leading Marks will be displaying solutions for marking solutions including:
If you would you like to save time and money by making it easier to print labels or tags at your facility, now is the time to act! Purchase either the MG3 or the Rolly3000 and receive free Cembre printing materials. Cembre is extending their promotions to September 30, 2018 for two of its most popular products, the MG3 and Rolly3000. Check out the Promotional Flyers below... MG3 – Marking GeniusMarkingenius® MG3 has been exclusively designed by Cembre for the identification of conductors and electrical components. Markingenius® MG3 is a high resolution printer based on thermal transfer technology, capable of producing tags for cables, pipes and tubes; terminal block markers and legends and labels for all electrical panels, components and equipment. All Cembre MG media can be printed with monocolour Windows True Type fonts at high speed. Markingenius® MG3 will also reproduce Clipart images, drawings, barcodes and bitmaps down to very small sizes. Compact, ergonomic, clean and quiet Markingenius® MG3 may be conveniently located in an office, like any other computer peripheral. Each monochrome ribbon can print more than 300.000 MG-TPMF 4×10 mm cable tags with full printable surface coverage. Carriage loading and unloading operations are rapid; support templates are easily interchanged and as the pigment deposited from the ribbon dries instantaneously, printed sheets are immediately ready to use.
Rolly 3000Robust and quiet, ROLLY3000 provides reliable, intensive operation in office or factory combined with the facility to optimize printer set-up according to the media. ROLLY3000 is delivered complete with power & connection cables and GENIUSPRO software including a universal driver for Windows® (7, 8 & 10) to ensure program compatibility.
In addition, there are specific colour ribbons for printing heat shrinkable tubing. Ribbons provide resin based indelible print in accordance with the scratch and abrasion resistance requirements of CEI 16-7.
Depending on the application, a large selection of printable materials is available, such as cable tags, cable markers, labels, continuous material on roll and heat shrinkable tubing with high UV resistance. The Rolly 3000 is a brand new Thermal Transfer Printer by Cembre. This printer can print both labels and heat-shrinkable tubes in the same printer.
Leading Marks Featured Products Laser Marking is permanent identification without product deformation up to deep engraving can all be accomplished with laser marking. Depending on the substrate being marked, the available cycle time, and the power of the laser permanent direct-part marks can be applied quickly from stand-alone work stations to fully integrated marking systems.
RFID or Radio-Frequency IDentification is becoming a popular labeling method that allows for quickly locating a component or asset, capture equipment details, and much more. Options for RFID labeling can be simple labels with adhesive, or rugged devices that survive in almost any environment. Join us for a one-day event on May 10, 2018 from 11:00 AM - 4:00 PM at the Ambassador Center in Erie, PA, showcasing the latest advancements in automation technology, robotics, manufacturing, and how they affect and compliment the skilled workforce in northwest Pennsylvania. Vendors will demonstrate the latest manufacturing technology for a smarter and more productive shop floor. Educational sessions will highlight advanced technology and applications. We will have on display an assortment of state-of-art marking technologies including laser marking, thermal transfer printing, and in-machine dot peen marking systems. As a featured sponsor of this Manufacturing Expo we will also showcase the use of mobile apps for record-keeping through the exhibitor-visitor interactions. Here is a preview of some of the products we will be featuring at the show!
Come and see what these high school students can accomplish or better yet, volunteer to help out. You can also meet with Laurie Barcaskey, President of Leading Marks. Laurie is volunteering at this event that runs from April 13 @ 8:00 am – April 14 @ 5:00 pm. There will surely be tons of sparks and lots of excitement! Complete our registration form to let us know you will be joining us! Southwestern Pennsylvania BotsIQ is a manufacturing workforce development program of the Pittsburgh Chapter National Tooling & Machining Foundation, a non-profit 501(c)3 organization. The program is affiliated with the National Robotics League and is managed by New Century Careers. What is BotsIQ?BotsIQ is a manufacturing workforce development program whose goal is to provide a pathway for high school students to learn about rewarding career options in manufacturing. This is accomplished by inviting students to participate in an exciting, hands-on high school robotics competition. Laurie Barcaskey, President of Leading Marks LLC, will be at the 3rd Annual Associate Night for NTMA Akron and discussing solutions for marking machine components. There will also be several products on display as a focus of the discussions:
The event, held on March 20th from 5:30pm to 8pm will be held at the Hilton Fairlawn on 3180 W Market St, Akron, OH 44333. The mini-tradeshow style event is free for NTMA members and $15 for non-members. Drinks will be available and light appetizers will be provided. About the Speaker Laurie Barcaskey of Leading Marks is an authorized manufacturer’s representative with 30 years of experience and shop floor knowledge of solutions for industrial identification, part traceability and pipe testing. Laurie is the third generation of one of the marking industry’s most innovative and enduring family legacies, tracing back to 1889.Write something about yourself. No need to be fancy, just an overview. |
Follow us on LInkedIN for the latest breaking news!
AuthorS
There are variety of authors who write the articles including marking manufacturers. You'll find a lot of technical imformation, application stories and new product releases here. Be sure and click a category below that interests you to search it. Archives
April 2024
Categories
All
|